136
Views

The Hardest Part of Maritime Regulation Begins After the Rule Is Written

iStock
iStock

Maritime regulation is often discussed in terms of the rules themselves: what has been agreed, when it enters into force, and what ships, owners or operators will be required to do. But writing the rule is only the beginning.

The harder task starts when an international requirement has to work on board a vessel, in a shipyard, at a port or within a company's day-to-day operations. This is particularly relevant to the International Maritime Organization's World Maritime Day theme for 2026 and 2027, "From Policy to Practice: Powering Maritime Excellence."

It is a useful reminder that the effectiveness of regulation ultimately depends not on what is written on paper, but on what happens when those requirements meet engineering, infrastructure, commercial realities and the people responsible for putting them into practice.

A regulatory objective may be clear, but implementing it can require changes to vessel design, equipment, operating procedures, maintenance, training, emergency response and shore-side support. The gap between policy and practice is therefore not necessarily a failure of regulation. It is the space where regulation has to become operational reality.

The maritime sector operates across an enormous range of vessel types, ages, trades and operating profiles. Ships may call at ports with very different levels of infrastructure and operate far from immediate technical assistance. A requirement that appears straightforward at policy level can therefore create a much more complex engineering and operational challenge.

This is particularly apparent when new technologies are introduced. Alternative fuels provide one example. The regulatory discussion may focus on their role in reducing emissions, but the operational questions extend much further. How is the fuel stored and transferred? What detection, ventilation and fire-protection arrangements are required? What maintenance procedures are appropriate? How should the crew respond if something goes wrong?

These questions cannot be answered simply by establishing the policy objective. Policy has to be translated into engineering, and engineering into safe operation.

Compliance is the starting point

There is also an important distinction between complying with a requirement and being genuinely ready to manage it. A system may meet the applicable technical requirements, but its effectiveness still depends on how it is operated and maintained.

Procedures need to work in real conditions. Crew members need sufficient competence and familiarity. Maintenance arrangements need to reflect the characteristics of the equipment. Emergency plans must be practical rather than simply documented.

The objective of regulation is not to create more paperwork. It is to contribute to safer, more secure and more sustainable maritime operations. Organizations therefore need to ask more than, "Are we compliant?" They also need to ask, "Can we demonstrate that this requirement works as intended in practice?" Those are not always the same thing.

Consider risk early

The point at which regulatory and safety requirements are considered can have a major influence on how effectively they are implemented. If these considerations enter a project only after equipment, machinery arrangements or system architectures have already been selected, the options for addressing potential issues may be limited.

Earlier engagement gives designers, owners, yards, technology providers and Class more opportunity to identify problems while there is still flexibility to address them. The aim is not for regulation or Class to dictate technology selection. It is to create a process in which innovation and assurance develop together.

Risk assessment is central to that process. It allows the industry to consider not only whether a system functions as intended, but what happens when it does not. Failure modes, interfaces, human interaction, maintenance requirements and emergency scenarios all need to be understood before a technology can move confidently from concept to operation.

Digital systems bring the same challenge

The same principle increasingly applies to digitalization. Data, automation, remote monitoring and software can provide valuable support to ship operations, but they also raise practical questions. Can the information be trusted? Are systems resilient? Who is authorized to make changes? What happens if communication with shore is interrupted? Who has final authority when an automated recommendation conflicts with onboard judgement?

These are not purely technical questions. They concern governance, accountability, competence and operational control. As maritime technology becomes more sophisticated, translating regulatory principles into clearly defined responsibilities will become increasingly important. A system can only support safe operation if the people using it understand both what it can do and where its limitations lie.

The human element remains central

Every regulatory requirement eventually reaches somebody who has to interpret, implement, inspect, maintain or operate it - a naval architect, surveyor, superintendent or seafarer. If those people do not understand the purpose of the requirement, or lack the knowledge and resources needed to implement it properly, the effectiveness of the regulation is weakened.

Competence therefore has to evolve alongside regulation. Training should not simply explain what a rule says. It needs to prepare people for what that rule means in operation.

From rules to results

No single participant in shipping can close the gap between policy and practice alone. Regulators, flag administrations, classification societies, shipowners, yards, manufacturers, technology providers, ports and seafarers all play a part in turning requirements into safe and workable operations.

That process also needs to be two-way. Regulation informs practice, but operational experience should help the industry understand where guidance, training or further technical development may be needed.

The maritime industry needs robust international regulation. But regulation delivers its value only when it survives contact with the realities of a working vessel. The most meaningful test is therefore not simply whether a rule has been adopted, or whether compliance can be demonstrated on the day of a survey. It is whether that requirement has become embedded in design, maintenance, procedures, competence and everyday decision-making.

That is where the difficult work happens. And ultimately, that is where maritime regulation delivers its value.

T.K. Sahu is Joint Managing Director of Indian Register of Shipping (IRClass).

The opinions expressed herein are the author's and not necessarily those of The Maritime Executive.