The Future in Solids Control

great

By MarEx 2016-05-31 16:40:24

Drastic times require drastic measures. With oil prices going down Fluid Systems provides you with the necessary tools to improve your efficiency; we will help you accomplish and surplus your production goals with our latest technological novelties: The Barkeeper (Dual Density Solution), The Multi G, The ProdiG (Smart Shaker), the HpEliminator and a new generation of Screen Panels called Platinum Series. The Solids Control segment will be revolutionized by reducing approximately 75 % in their total Solids Control costs.

What are these novelties?

1) BARKEEPER (TM): a patent pending, high process volume classifier, for use in barite recovery and dual density drilling operations. The centrifugal separator is trademarked as the BARKEEPER (TM) and classifies drilling mud into concentrated high density and low density streams. Each module processes over 250 GPM, even at high mud weights. A series of modules can process at or above circulating mud volumes for near 100% recovery of high density mud and the delivery of low density streams to centrifuges for the removal of drilled solids. The clean low density stream can be flowed to the active mud system or re-injection into the riser. Extensive prototype field tests have yielded excellent results without capacity issues associated with older technologies and final field trials of production units are underway. Fluid Systems Inc. believes the BARKEEPER (TM) has the ability to reduce drilling mud costs significantly through the recovery of high density fluids at high capacity while reducing traditional solids control equipment costs by 75% or more.

2) MultiG: A high “G” force shaker that uses a patented technology of “exciters” that generate and apply very high “G” forces to the screen surface, allowing for a very low OOC when used as a cuttings dryer.

Since the “exciters” also produce multi-frequency, they virtually eliminate screen blinding. The MultiG can also be used as a flow line shaker, providing a much drier discharge.

High G-forces (up to 50 G’s)

High processing capacity

Better efficiency

No-screen blinding

3) ProdiG: A fully automated, computer controlled shaker that is coupled with the rig monitoring system using flow rate, density, ROP, mud Rheology and more (up to 24 channels of input data), to make the necessary adjustments to frequency (RPM), “G” force, conveyance rate, etc.

The shaker will also adjust to keep the OOC to a minimum.

The products and services herein described in this press release are not endorsed by The Maritime Executive.